How to store shield correctly?

The machine tool protective cover can strictly prevent dust, chips, hard sand, etc. from entering the track, reduce the damage of hard granular foreign matter to the sliding rail surface, reduce the influence of guide rail deformation due to operation on the processing accuracy, and maintain the processing accuracy of the machine tool. 　　

The surface of the protective cover should be smooth without burrs and sharp edges, and should not become a new source of danger; and the protective cover should not affect the field of vision and normal operation, and should be convenient for equipment inspection and maintenance. Although the life of the machine tool protective cover is long, it also needs regular maintenance.

So how to maintain it?

1. Use wooden boxes customized with wooden boards to seal the products to prevent dust and other debris from damaging the steel plate protective cover.

2. Choose a clean and dry area for sealing.

3. When sealing, they must be placed separately according to size, so that the delivery and pickup are based on specifications and models.

4. Handle it with care when sorting to avoid damage to the protective cover.
The steel plate machine tool protective cover is waterproof, dustproof, coolant-proof, iron filings-proof, etc., and fire-resistant and flexible polyurethane or rubber strips are used between the sections. The general speed is 25 meters/minute, and the high-speed rail protection with special internal structure can reach a speed of 60 meters/minute. The machine tool protective cover should not be used to hide tools and impurities on the operating surface, and should not be washed with oil or water. The cover of the machine tool protective cover should remain calm and stable during operation, and should not be accelerated suddenly, or the gap should be completely biased to one side. For flexible protective covers, chips should not be splashed on the cover surface, and fire should be paid attention to to avoid unnecessary human losses.